None can deny the significance of light fixtures, which brighten up house, and usually function for a prolonged period without much hassle. At times, though, they might occasionally flicker, overheat, make humming sound, acquire burnt appearance, etc. Well, prior to seeking professional assistance, you must first try understanding reasons behind such problems.

Loose Plug

Is only one of your lamps exhibiting symptoms of glitch? If yes, it might arise because of a loose connection between outlet and plug. Top-notch electrician in Point Cook adjusts metal prongs that in turn lets a plug firmly sit inside a wall socket.

Faulty Switch

An inferior connection between the switch and its light can also pave way for problems. Wiggle the switch gently, and if it causes a flicker, you have found the issue. Opt for a replacement as soon as possible.

Wobbly Wiring Connection

Apart from destroying light fixtures, wobbly wiring connection is also believed to be a major cause of fires. The problem might be found only in one location but is still dangerous. Outdated wiring, switches, breakers, connectors, etc. can endanger your entire electrical system. 

Problematic Socket Tab

In case a new bulb is not working, turn off the switch, pull out plug, and bend tiny metal tab present inside socket. The tab sometimes gets pressed so much so that they fail to touch the electrical contact. 

Overloaded Circuit

Are your lights blinking or dimming when you turn on your washing machine or air conditioner? If yes, consider blaming overloaded circuit, which means certain appliances are utilising more current than a circuit can manage. 

If a light flickers for one to two times, there is nothing to be concerned. Even in case of an exceptionally designed electrical system with large loads on circuit, minor flickering is considered natural.

If a light flickers severely and does not stop, there is an issue you need to resolve. Bearing failure, for instance, will compel the motor to extract more current as an appliance struggles to start.

Voltage Fluctuation

Renowned electrician in Point Cook said voltage fluctuation might also be held responsible. Three distinct signs include:

• lights blink continuously when you operate heavy appliance
• lights dim unexpectedly, or in other words, without any warning
• lights burn out quite quickly

Slight variations are acceptable, but any residential property must register between 110 and 130 volts. Professionals first check voltage through a special device called voltmeter and then fabricate solutions based on readings.

Addressing problems specified above keep a wide range of undesirable consequences at bay. For instance, people can stop worrying about fire, which puts both life and property in jeopardy, power outage, electrocution, etc. Also, remember when you share the transformer with your neighbour, his or her excess electrical usage can, unfortunately, damage your lights.